Controlling device using web interface

Different configuration settings of the device are available in the online platform, it allows you to send command to one or multiple device in one go. C:sourceimagecontroldevice

../_images/confsetting.png

The figure shows all Web Interface Controls by which you can set the commands and take pictures from the device camera. Response Box shows the message replied by the device. The operation you perform on device you get the reply by device in response box.

../_images/responsebox.png

Changing IP/PORT

You can change the IP and Port of device directly using web interface on our platform. You have to write ip and port and send it to the selected device, you get the message in response box like set ip port ok.

Changing APN

You can change the APN of device directly using web interface on our platform. You have to write APN address for the network provider which you are using. You get the message in response box like set APN ok. Example: airtelgprs.com (for Airtel), internet (for Idea) , www(for Vodafone) etc.

Changing High Speed / Low Speed threshold

You can set High Speed and Low Speed of vehicle for alert.

Stopping/Starting vehicle

You can Stop or Start your vehicle directly from the web interface. Select any moving vehicle then click on Stop Car button it stops the moving vehicle. And you can start your vehicle same as stop car function. Click on Start car button the vehicle will be started.

Warning: If you stop any vehicle from web interface then you have to start it also from web interface.

Taking snapshot

../_images/snapshot.png

As you can see in the figure you can choose the camera which is installed in the vehicle and you can also choose camera quality and then click on capture button. It captures the current time image of the vehicle and you can check those images on image captured reports.